Machine Details
LH-800E AUTOMATIC DIE CUTTING MACHINE
The LH-800E is fully automatic die-cutting machine can reach a maximum speed of 7000 sheets/hour, suitable for 0.1-2mm paper and corrugated paper below 4mm. The equipment introduces advanced technology from Taiwan, China and Switzerland, and adopts high-end software and hardware configuration.
The entire machine is equipped with a middle line fast positioning and non-stop paper feeding and receiving device, which brings fast economic returns with shorter order changing time and continuous productivity.
The transformation of equipment automation has reduced the increasing labor costs for you, and also solved the shortcomings of traditional manual indentation machines such as slow speed and low safety factor, allowing you to experience the charm of high-speed and safe production. In the era of meager profits, seize the opportunity for you and grasp every minute that determines the outcome.
HIGH SPEED FEEDER
- High speed feeder head with 4 suction and 4 feeding nozzles. The paper feeding is stable and smooth, and the height and angle of suction nozzle can be adjusted accordingly
Feeder head can be slightly adjusted in front and back
- The non-stop paper feeding system can realize the continuous operation of the machine without stopping the machine to load paper
- Equipped with Japanese Mitsui paper feeding clutch, the operation is faster and more convenient
- Double sheet detection device
- Electric fine adjustment of paper feeding pile, left and right fine adjustment
- The front gear can be switched and the front speed reducer is in place, which is conducive to the positioning of high-speed tissue paper
FEEDING POSITIONING SECTION
1. The deceleration mechanism before the paper feeding positioning of Feeder, ensures the positioning accuracy of the paper feeding position
2. The side positioning adopts Taiwan’s original push-pull side gauge device, which is selected according to the paper, and is easy to switch
3. Inclined paper feeding table design is more suitable for high-speed paper conveying and positioning
4. Front gauge positioning can be adjusted individually
DIE CUTTING SECTION
1. Electric pressure regulation, Japanese Omron pressure control system, with higher accuracy
2. The fast positioning of the middle line makes the plate change faster and saves the plate change time
3. Pneumatic fast locking plate
4. The main parts of the heart (crankshaft, worm, worm gear, elbow shaft) are made of imported high-grade alloy materials
5. The die-cut steel plate hardness HRC45-47 is accurate and durable, and adopts the lock close to one side
DRIVING SYSTEM
1. High precision indexing driving box
2. Torque limiter protection system
3. TECO Brand motor from Taiwan
4. The high quality pneumatic clutch reduces noise and minimizes impact when stopping the machine at a high speed.
5. Belt driving system
DELIVERY SECTION
1. Non-stop delivery device
2. The flat and down air blowing is adjustable, and the finished product of the paper receiving section is stabilized by using the segmented adjustable brush and the paper flattening blowing device
3. Paper return detection device
4. Optional labeling machine
5. Main chain automatic lubrication system
6. Pneumatic sampling
ELECTRIC CABINET
1. PLC controls the operation of the whole machine and the fault monitoring system
2. Advanced European and American national safety standards (CE standards) are adopted for electrical components and electrical circuits
LH-800E Ground Plot
LH-800E Specifications
| Processed materials | |||
| Carton | Range | 0.1-2 mm | |
| Corrugated board | Max. | 4 mm | |
| Capability | |||
| Sheet size | Max. Min. |
800 x 620 mm 340 x 260 mm |
|
| Cutting Size | Max. | 770 x 600 mm | |
| Speed | 7000 s/h | ||
| Precision | ±0.1mm | ||
| Cutting force | 200 N/cm² | ||
| Pile Height | |||
| Feeder | Max. | 1150 mm | |
| Delivery | Max. | 1000 mm | |
| Dimensions & Weight | |||
| Dimensions | 4350×2000×1690 mm | ||
| ( Length+preload rail * Width+platform * Height ) | |||
| Net weight | 8.5 tons | ||
| Electricity and Air Consumption | |||
| Main Motor Power | 12.75KW | ||
| Total Power | 380V 50HZ 3-phase | ||
| Air Consumption | 0.6—0.8 MPa ；0.36m³/min | ||
| Others | |||
| Gripper Margin | Min. | 8 mm | |
| The height of knives | 23.8 mm | ||
| Distance Between the first knife to the wooden edge | |||
| Inner Chase Size | 820×628 mm | ||
| Bottom Steel Size | 826×628 mm | ||